Decoration stage · material and position control
Select Labeling Machinery from the Bottle and Label System
Label technology is selected around the container, label material, registration, surface condition, application position, code and downstream pack—not from the word labeler alone.
Solve the production problem before buying more machinery
Use a measured symptom and a controlled retest to decide whether the next action is material correction, maintenance, interface work or a machine change.
Wrinkled, skewed or lifting bottle labels?
Separate sleeve, OPP and self-adhesive routes. Locate the first visible defect and retest the approved bottle and label before changing the machine.
Wrinkled or skewed bottle labelsDIRECT ANSWER
What the buyer should decide
Provide controlled bottle and label drawings, material samples and the required applied result. Confirm how the machine handles wet surfaces, transparent marks, seams, print registration, code location, rejects and every bottle format.
| Decision field | Confirm | Why it changes the purchase |
|---|---|---|
| Technology | Sleeve, roll-fed or pressure-sensitive basis | Changes applicator and consumables |
| Registration | Artwork, seam, mark and code position | Controls sensors and setup |
| Bottle state | Surface moisture, temperature and stability | Changes application reliability |
REQUIRED INPUTS
Prepare the evidence before selection
Missing fields should remain marked as open rather than converted into assumptions.
- Bottle drawings and samples
- Label drawing and material
- Artwork registration requirement
- Label application height
- Bottle surface condition
- Code content and location
TRADE-OFFS
Make the choice visible
Every option changes the machinery, operating work or project boundary.
High decoration coverage
Provides more graphic area while increasing material and shrink control.
Fast changeover
Reduces downtime but may require dedicated recipes and change parts.
Inspection depth
Improves defect detection while adding cameras, rejection and validation.
PURCHASING RISKS
Do not let these gaps hide in the quotation
Carry every unresolved item into clarification and contract documents.
- Testing with unapproved label material
- Ignoring condensation after filling
- Omitting seam and code position
- Assuming one sensor sees every artwork
WORK SEQUENCE
Move from data to a controlled next action
- 01
Freeze bottle and label revisions.
- 02
Select the application technology.
- 03
Define registration and defects.
- 04
Review changeover and rejects.
- 05
Run production-representative FAT samples.
Technical descriptions are selection guidance. Final machine, capacity, material, component, interface, utility and service details must be confirmed in the project proposal.
Content reviewed:
NEXT PURCHASING ACTION
Send the actual label construction and artwork.
Confirm bottle surface, position, code and inspection requirements.